- 1). Close the grill. Turn the control knob on the front of the grill to "High." The heat cooks debris off the burners. Allow the grill to heat for 5 minutes. Open the grill top.
- 2
Place a bowl of water near the grill.une feuille morte image by Francis Lemp??ri?¡§re from Fotolia.com
Place a bowl of water next to the grill. Since the grill remains on, keep the bowl away from the heat source and wear an oven or barbecue mitt. - 3). Turn each knob to the "Off" position. The surface remains hot for a short time.
- 4
Scrub with a barbecue brush.barbecue set image by Aleksandr Lobanov from Fotolia.com
Scrub the porcelain grate with a barbecue brush, dipping it frequently in the bowl of water to remove debris. The water creates steam, which aids cleaning. Allow the surface to cool for approximately 20 minutes. - 5). Prepare a solution of liquid dish detergent and hot water. Mix it in a bucket or tray large enough for the grate.
- 6). Remove the porcelain grate and flavor plates. Lift the grate up and pull it towards you. Repeat the process with the flavor plate, which sits directly below the grate. Place the grate and flavor plate in the bucket.
- 7
Check the grate in 15 minutes.wind up timer at 15 minutes image by Andrew Brown from Fotolia.com
Test the grates. After 15 minutes, gently scrape the grates with a soft cloth. If debris easily comes off, remove the grates and plate. If debris clings, soak for another 15 minutes. - 8
Wipe the burners with a soft cloth.a gas burner. image by Saskia Massink from Fotolia.com
Wipe excess grease from the surface of the burners with a soft cloth. - 9). Remove grates and plate from the soapy water. Scrub gently with a scouring pad. Use Teflon®. A steel wool or Brillo pad permanently scratches the surface. Rinse and dry the surfaces. Replace plate and grates.
- 10
Wipe knobs and painted parts with a soft cloth or sponge dipped in mild detergent. Polish with a soft clean cloth.
previous post
next post