- 1). Put on a pair of rubber gloves and eye protection.
- 2). Pour a bottle of 100 percent vinegar into a spray bottle and spray every inch of the mold-covered seal.
- 3). Sprinkle the mold with baking soda and allow the vinegar and baking soda to sit for 15 minutes.
- 4). Scrub the seal with an old toothbrush until the mold is cleaned off. Rinse the seal with clean water and allow the grime to go down the drain.
- 5). Spray the seal with an equal mixture of water and bleach once a week to keep mold from returning.
previous post