- 1). Strip the ends from the vehicle's power, ground and speaker wires using the wire stripper. Slide the ring connectors onto the stripped power and ground wires and secure them in place using the wire crimper. Do not attach anything onto the stripped ends of the speaker wires.
- 2). Unscrew the antenna connector located on the back of the radio. Put the antenna wire from the vehicle in place. The antenna connection is located on the left side of the back of the Europa. Secure the antenna wire by reinserting the screw.
- 3). Remove the bolt in place to secure the ground wire and position the ground wire's ring connector. Replace the bolt to secure the ground wire in place.
- 4). Remove the screw from the power wire connector and position the ring connector attached to the vehicle's power wire. Replace the screw to securely fasten the ring connector in place.
- 5). Insert the stripped speaker wires into the speaker inputs on the back of the radio labeled with a "+" and "-". Insert the positive speaker wires into the "+" inputs and the negative speaker wires into the "-" inputs.