- 1
Build a form for the concrete countertop by attaching a 1-1/2 ledge around all sides of the top using the 2x4 wood. Lay building paper, re bar and wire reinforcing with one inch of the form' s edges. Use wire to attach the pieces together. Spray the edges of the form with cooking spray to prevent the concrete from sticking to the form. - 2
Pour the cement ready mix into the two buckets half full. While mixing the cement add color if desired. Mix cement and pour inside the form, make sure the mix is firmly spread into the corners. of the form. Screed, level and trowel smooth. Let concrete sit overnight to cure. - 3
When the concrete counter top is cure overnight, measure the area on the inside the counter top to form the backslash one inch wide and four inches height. Close the end of the 2 x 4 with a small block of wood using a hammer and nail. Spray the bottom of the counter top with cooking spray to prevent the wood is easy to remove from the cure counter top. Let cure overnight before moving the backslash board.
next post