- 1). Place the drain pan under the radiator and open the petcock to drain the radiator. Remove the upper and lower radiator hoses.
- 2). Use the 3/8-inch drive ratchet and a 10-mm socket to remove the bolts securing the fan shroud to the radiator support. Use a wrench to remove the 10-mm nuts, securing the fan to the water pump pulley. Pull the fan off and remove the fan and shroud together.
- 3). Remove the accessory belts using a 3/8-inch drive socket.
- 4). Install the crankshaft pulley-locking tool. Remove the crankshaft pulley bolt using the long ½-inch drive breaker bar and a 19-mm socket.
previous post
next post