- 1). Mark a spot on the upper corner of one end of the wood strip or wooden ruler. Keep it at least 1/2 inch in from the end of the wood.
- 2). Drill the marked spot all the way through.
- 3). Crack the very last link in the strip of bicycle chain, so it has an open end. Thread the open side through the end of the oval lock-link. Open the lock-link, and thread the open end through the wooden handle's drilled-out hole.
- 4). Close the lock-link, and add the extra pin into the last chain link. Use the chain tool to push the new link in, closing the link onto the lock-link and attaching the chain to the wooden handle.
- 5). Wrap the bottom half of the wooden handle with duct tape as a smooth surface for use.
next post