Society & Culture & Entertainment Arts & Crafts Business

How to Replace a Battery in a Tissot Watch

    • 1). Examine the Tissot watch case back to determine whether it's a snap-down or screw-down case back. Snap-backs are found on older models. A lip on the case back can be found at 6 or 12 o'clock. Screw-down models feature notches around the edges of the case back. If there are no notches or lip, your Tissot may have a pressurized case back. Do not attempt to remove it. Take it to a watchmaker. Skip to Step 3 if you have a notched screw-down model.

    • 2). Pry open the snap-down case back with a case blade by inserting it under the lip of the case back. Push the blade down. The case back will pop off.

    • 3). Insert a detached pin from the case opener into the notch of a screw-down case back to determine the correct size pins to use. Install the correct pins onto the case opener. Place the pins of the case opener into the notches. Rotate the case opener counterclockwise until the case back unscrews completely from the case. A rubber gasket will come off with the Tissot case back, according to the Watch Batteries website.

    • 4). Locate the battery, which is held in place by a side-mounted spring or a flat strap over the top of the battery.

    • 5). Insert a screwdriver between the spring and battery. The battery will fall out. Loosen the screw fastening the battery strap with a screwdriver if a strap is holding the battery. Do not remove the screw. Remove the battery with tweezers.

    • 6). Replace the old battery. Use a clean brush to remove any dust inside the Tissot case. Insert the new battery in reverse order of the removal using the tweezers. Use the screwdriver to tighten the screw on the strap holder.

    • 7). Install a new rubber gasket onto the case rim as a precautionary measure to ensure the watch remains water resistant. Make sure the gasket is seated properly against the rim.

    • 8). Snap the Tissot watch case back into place with your thumb and forefinger. See Step 9 for screw-down models.

    • 9). Use the case opener to screw down the case back on screw-down model. Perform this function in the reverse order of removal.

Related posts "Society & Culture & Entertainment : Arts & Crafts Business"

How To Attract The Kind Of Birds You Want In Your Birdhouse

Arts & Crafts Business

How to Glue a Puzzle Together & Frame It

Arts & Crafts Business

How to Make Words From Wire

Arts & Crafts Business

Utility Of Aluminium Wire

Arts & Crafts Business

Video: How to Draw With Chalk Pastels for Kids

Arts & Crafts Business

How to Knit a Node Bag

Arts & Crafts Business

How to Sew Patches by Hand Onto Leather

Arts & Crafts Business

Stick-Weaving Crafts

Arts & Crafts Business

How to Make a Yugioh Level 3 Deck

Arts & Crafts Business

Leave a Comment