- 1). Open the hood and loosen the retaining nut on the cable clamp running to the negative battery terminal. To do this turn the nut counterclockwise with a socket wrench.
- 2). Slide the cable clamp off the negative terminal by pulling up on the clamp. You may have to gently twist the clamp from side to side, but it should slide right off when the retaining nut is loose.
- 3). Let the battery sit unconnected for at least 1 minute.
- 4). Reconnect the cable to the negative battery terminal by sliding the cable clamp over the top of the terminal and tightening the retaining nut on the cable clamp clockwise with a socket wrench. You should notice the ABS light go out.