- 1). Locate the wheel unit at the edge of the desk, making sure the wheel itself has plenty of room to move from one side to the other. Adjust the two knobs located on the bottom of the wheel until they both firmly make contact with the bottom of the desktop.
- 2). Set the pedal assembly on the floor under the desk. Plug the data cable coming from it into the empty port on the back of the wheel unit.
- 3). Plug the USB cable connected to the wheel unit into any free port on the front or back of the computer. Give the computer moment to recognize the new device, then a word balloon will pop up saying that the wheel has been recognized.
- 4). Insert the Thrustmaster Formula T2 installation CD into the disk drive, and wait for the installer to appear. Follow the on-screen instructions to install the device. Once installation has completed, the system is ready to use.
previous post