- 1). Measure the length of the table and add 3 feet. Measure the width of the table and divide it in half.
- 2). Use the dimensions you calculated to cut a rectangle from a long strip of paper or a disposable paper or plastic tablecloth.
- 3). Mark the center of one of the short ends of the runner with a small pencil mark. Measure 1 foot from this end on each of the long sides and mark these points.
- 4). Draw a line from the mark in the center of the short end to the points you marked on the sides. You will be drawing a point on the end of the runner. Do the same on the other end of the runner.
- 5). Cut along the lines you drew. Place the runner on the table over the tablecloth or by itself.
previous post
next post