- 1). Turn off all power to your Jacuzzi. Remove the cover from the filter skimmer using the attached handles. The filter skimmer is found inside your Jacuzzi along the edge, under the water line, with a grating pointing up. Pull the skimmer bag gently from its clips. Reach into the hole the bag was covering and find the filter. Unscrew the filter and pull it out.
- 2). Place the new filter in the Jacuzzi, fully submerging it. Point it bottom up to remove any air bubbles from the filter. After all the air has been forced out of the filter, keep it submerged and bring it to the filter skimmer, lowering it down. Screw in the filter gently, stopping when you meet resistance from the threads.
- 3). Clean the skimmer bag thoroughly, and re-seat it in its clips. Turn on the power to the Jacuzzi and run it through a filtration cycle to clean the Jacuzzi and ensure the filtration system is running correctly.
next post