- 1). Place the awning in its travel position and remove the old knobs. Turn the knobs counterclockwise to remove them. The knobs are located on the rafters, which will be inside the arms.
- 2). Apply a silicone spray to the new knobs. Do not use any other type of lubricant
- 3). Inspect the washers on the new knobs to ensure that the stack-up is correct. The metal washer should be closest to the knob and the plastic washer should be on top of the metal washer.
- 4). Insert the knobs into the nutsert or nut on the rafters and turn clockwise to tighten.
previous post
next post