- 1). Wet the scrub pad with warm water and soap. Scrub the handlebars clean. Allow the handlebar to completely air-dry before you proceed.
- 2). Apply a small amount of the handlebar grip adhesive to the inside of the grip using your finger. Make sure the you coat the inside of the grip completely and evenly. Also, do this fast because the adhesive is the lubrication that helps slide the grips onto the handlebars, but it dries fast and then sticks to the metal.
- 3). Quickly force the handlebar grips onto the handlebar. Push the flat end of the grip while pulling the opposite end toward the center frame of the handlebars.
- 4). Allow the adhesive to set for about three hours before taking your bike for a ride.
previous post
next post