- 1). Lay all the pieces of the tent out over the area you intend to set up the tent. You should have the tent itself as well as collapsible, pliable support poles.
- 2). Unfold the support poles so that they are fully open and straight. In this state they will be ready for insertion into the tent sleeves.
- 3). Lay the bottom tent cover over the area you intend to mount the tent and place the tent material over the cover.
- 4). Align the corners of the tent material with the corners of the bottom cover so that the loops at the ends of the corners straps line up.
- 5). Insert the sharp tent pegs through the holes and into the ground, securing both the tent to the ground as well as to the bottom cover.
- 6). Locate the support sleeves that run intermittently along the tent fabric. Insert one of the poles into the first sleeve at the bottom of the tent and follow it along, threading it through the remaining sleeves in its path until you reach the other side. Connect both ends of the pole to the pole holders on the bottom of the tent.
- 7). Repeat the process for the remaining tent poles until the tent is fully setup.
previous post
next post