If you own a gas scooter, it is important that you know how to handle the technical
parts of your scooter. Many people lack understanding and ideas and they often
end up paying hundreds and thousand dollar bills for repayment. Therefore in
this article, we will give you some useful tips that will help you fix technical
issues of your gas scooter for its better performance and also to avoid other
technical problems.
Starting your Engine: If your engine doesnt start
and giving a problem, then there can be several things that can cause the problem.
In this situation, one thing you can do is check the gas in the tank and make
sure that the engine is getting the fuel. When there is no maintenance, chances
is there can blockage in the fuel pipe that may be the cause of not getting
started. You can also check the choke as it helps the scooter to start. However,
one reason can also be because of cold, it takes longer time for the engine
to heat and start.

Carburetor Increasing Screw: It is frequently seen that people
often complain about their scooter ideals faster. If you are facing this problem,
then what you can do is check the carburetor increasing screw. This happens
because they get loose and then the engine starts to suck in air and this is
what causes the problem. Always make sure that all the screws are tightened
at their particular places.

Engine Performance: If your scooter is lacking performance
and you want to boost it, one thing that you can do is let your scooters
engine breathe while it runs. You can simply change the old air filter with
a new one or you can also repair or also change the carburetor because when
these things fail, people face lots of unwanted problems and can create a headache.

No power: There are many times when your scooter breaks down
and it loses its power to drive. In this case, you can clean the carbon clogged
up on the screen. Scooters have spark arrestors that is located near the exhausted
hole. You can take off the muffler cover and see the exhaust hole. If you see
it is clogged with carbon, you can use oil for cleaning and this can reduce
the problem.