Instructions

1

Click “Options” and select “Set Config... .”
2

Click the “Controllers” tab.
3

Select the type of controller you wish to emulate from the “Port 1” menu. If you are emulating a Sega Master System or GameGear, select “Port 1” in the “Master System/GameGear Controllers” section.
4

Select the controller you will assign from the “Use” menu.
5

Click “Define.” You will be prompted to press a button to correspond to the emulated controller buttons.
6

Press the buttons on the controller to assign them to emulated buttons until the prompts for every button have been completed.
7

Select a controller type from the “Port 2” menu if you are configuring a second controller for the emulator. Repeat Steps 4 to 6 for the second controller.