There are a lot of people who get injured from slip, trip and fall accidents each year. Most of these common injuries are to the back, wrist, elbow and knee. There are many things which cause slip, trip and fall accidents and one of this is incorrect floor cleaning. Everything must always be organized and shortened into small procedures.

Correct floor cleaning procedures should be followed for dust mopping, stripping and applying floor finishes. Some floors are manually clean meaning people do not use any equipment while there are others who utilized the assistance of equipment. Before the floor is clean you should blocked off the area to be cleaned.

Below are the procedures in floor cleaning:

€ Sweep the floor first to remove the dust before mopping. Dust and water means mud which is why it is logical to sweep the floor first before mopping.

€ Do not use a dirty mop or broom. Just like the cloths or towels you use for cleaning cleanliness and hygiene must likewise be applied to mops and brooms. Anything dirty contains bacteria and can contaminate the surrounding area. Mops and brooms must be clean first with detergents or disinfectants before using.

€ In case your mop is worn down you should change this since it will no longer be effective. You might have difficulty in using it thereby it will affect its usefulness.

€ Rinse your mop with clean water only. Soiled or dirty water may have bacteria which can infect people. Use only clean tap water when cleaning your mop. Do not re-use water where you soak your mop.

€ Use only the right and suitable detergents for your floor. Check label of your cleaning products.

€ If your floor looks very dirty, rinse and scrub the floor instead of mopping it. Scrubbing your floor is more effective in removing stubborn dirt.

€ Do not drag furniture or other objects across a floor made from wood. Put "gliding" furniture pads underneath the furniture to help in sliding it across the floor.

€ Use mats at every entrance so you do not bring in dirt from the outside.

€ Ensure your floor can dry fast and undisturbed after cleaning. After mopping you should put a sign to warn people that the floor is wet. This will make people avoid walking all over your mopped floor and prevent any slips and falls from happening.

€ Apply first coat of seal by pouring floor finish into a bucket and immersing a clean mop. Wring your mop and apply a thin coat to the floor.

€ Before applying the second coat allow your floor to completely dry first.

€ Allow floor to completely dry before opening to traffic.

Tips:

o Try using rugs in high traffic areas.
o Immediately remove or blot spills.
o Search for the correct rug cleaning and care requirements for your particular floor

A well-maintained clean floor will prevent any accidents, slips or trips. This also shows that you are considerate of other people by ensuring their safety. Cleaning the proper way will surely make your floor go a long way.