- 1). Disassemble the juicer according to the directions for your specific model. Miracle makes electric and manual wheat grass juicers. If your juicer is electric, make sure to unplug the juicer before removing any parts. Remove the hopper tray, feed chute, screen and auger. Remove the spout and the spout cover from the main unit. If your juicer is a manual style, unclamp the body from your work surface. Unscrew the pulp regulator knob. Remove the knob and any movable parts.
- 2). Clean the screens, pusher and auger of grass strands or dried clumps of wheat grass by using your fingers to pull them out.
- 3). Place the sink strainer in the drain to prevent any parts from being lost. Fill the sink with warm soapy water and soak all the parts for several minutes. Scrub the parts with the dish washing brush to remove all remaining pulp. Use the toothbrush to clean small parts and to clear the holes in the screen. Wipe down the main unit with a damp sponge.
- 4). Drain the sink. Refill the sink with warm water and 1 tbsp. of bleach diluted in one gallon of water. Soak all of the parts in the bleach solution for two minutes.
- 5). Remove all of the parts from the sink and set on a dry towel to air dry. Reassemble your juicer according to your model's directions.
next post