- 1). Use the end of the wire cutters to flatten out the top curve of the hangers. The hangers will retain the first arch, then flatten out so it can rest easily on top of a table. You should have a round-edged 90-degree angle.
- 2). Next, measure 6 inches from the bottom of the hanger hook portion outward on each side and cut the wires.
- 3). Twist one side around so it meets the other side and they are aligned.
- 4). Using the end of the wire cutters, bend the wires downward at a 90-degree angle approximately 4 inches from the bottom of the neck. This will create a long, squared "C" shape. Then bend another 90-degree angle upward, 1 inch away from the first bend.
- 5). Do the same with the other two hangers.
- 6). Secure the three wires together by wrapping them tightly with the masking tape. Wrap the tape at an angle so that it overlaps itself as you wind around the wires.
- 7). Cover the wrapping with the fabric or ribbon repeating the same overlapping winding. Cut away any excess fabric or ribbon.
- 8). Glue the end of the fabric to seal the wrapping and hold it in place.
- 9). Hot glue your decoration to the top of the purse hook.