- 1). Attach the bridle or headstall to the top of the snaffle ring. Tighten the Chicago screws or leather ties that hold the bridle in place.
- 2). Attach the reins to the snaffle, using either screws, snaps or ties depending on the design of the reins. Make sure the reins are secure.
- 3). Move the cheekpieces on the bridle to the last adjustment hole. This will ensure the bit does not pinch the horse's mouth when the bridle is put on.
- 4). Hold the bit in your right hand and hold the bridle in your left hand. Pull the top of the bridle over the horse's head and put it in place while putting the bit in the horse's mouth. Place the horse's ear through the headstall if using a one- or two-eared bridle.
- 5). Adjust the cheekpieces of the bridle until the snaffle just barely pulls up the sides of the horse's lip. Be sure that the snaffle is not too tight by looking at the side of the horse's mouth where the rings of the snaffle are. When the snaffle bit is properly adjusted, you will see a slight wrinkle at the side of his lip. If the lip appears to be pulled tight, the snaffle is too tight; adjust the cheek pieces to provide more slack.
previous post